A Guide to Wood Science
The study of wood as a renewable material and organic material is what is known as wood science. The processes and the tools used to utilize the material is what is known as wood technology. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The moisture courses the timber to decay and the insects eat through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. The protection of from this chemical is based on copper. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.
Many methods are being invented to protect the wood, and one of them is the copper metal method. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. An alternative name to be given to this method is the micronized copper wood preservative method. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. The characteristics of the wood are highly improved and the when this process is used to treat wood. The time the wood products treated using this method last is longer other types of treatment.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.